--------------------------------------------------------------------------------
Project Code: 2016.1.00324.L
--------------------------------------------------------------------------------
ObsUnitSet:

Band 3 (3mm) member uids:
    member.uid://A001/X87c/X20a
    member.uid://A001/X87c/X20e
    member.uid://A001/X87c/X212
    member.uid://A001/X87c/X21a
    member.uid://A001/X87c/X216
    
Band 6 (1mm) member uids:
    member.uid://A001/X87c/X21e
    member.uid://A001/X87c/X222
    member.uid://A001/X87c/X226
    member.uid://A001/X87c/X22a
    member.uid://A001/X87c/X22e
    member.uid://A001/X87c/X23a
    member.uid://A001/X87c/X232
    member.uid://A001/X87c/X236
--------------------------------------------------------------------------------
Data product legend:

ALMA Bands:
    aspecs3mm               - Band 3 data products, central frequency: 99.5 GHz
    aspecs1mm               - Band 6 data products, central frequency: 242.0 GHz
    
Calibrated visibilities:
    .concat.ms              - Full dataset (concatenated all execution blocks)
    .concat.tbin.ms         - Full dataset, time averaged to 30s (smaller size)
    .concat.tbin.noise.ms   - Signal coherence removed (180deg phase shifts)
    .concat.tbin.uvsub.ms   - No continuum (subtracted tclean nterms=2 model)

Image type:
    .cont                   - Continuum map, all channels averaged
    .cube.2chn              - Cube, 2 channel bins: 7.8MHz @ 3mm, 15.6MHz @ 1mm
    .cube.8chn              - Cube, 8 channel bins: 62.5MHz @ 1mm

Imaging weights:
    .nat                    - Natural weigths: best S/N
    .rob                    - Robust=0.5 weigths: better resolution, lower S/N
    .taper                  - Natural & uvtaper=2": more weights to large scales
    
Map or cube content:
    .image.clean.fits       - Final cleaned mosaic, flat noise
    .image.clean.conv.fits  - Convolved all planes to a common beam of 2.2"
    .image.clean.pbcor.fits - Corrected for primary beam, correct flux levels
    .image.dirty.fits       - Dirty map: inverted visibilities, not cleaned
    .model.clean.fits       - Model map: clean components, units of Jy/pixel
    .pb.fits                - Primary beam sensitivity pattern for the mosaic
    .psf.fits               - Point spread function, i.e. synthesized beam
    .residual.clean.fits    - Residual map after cleaning

Additional reduction:
    .linefree               - Channels with emission lines (CO, CI) were flagged
    .noise                  - Noise map, all signal coherence was removed
    .uvsub                  - Continuum emission was subtracted
--------------------------------------------------------------------------------